2HP Champion Grinder Pump 230V Internal Cap Start Standard Head Float Included

Description

FEATURES AND BENEFITS
The pump can easily handle waste from
Residential/Commercial Developments
Wastewater Transfer
Hospitals, Motels, Apartments
Schools, Universities
Churches
Campgrounds
Office Complexes
Sealed Entrance-Replaceable Power Cord
Easy to replace, prevents water from entering the motor housing through a cut power cord. Warranty is not voided if the plug is cut off.
Internal Start Kit
Internal Start / Run capacitor in the motor.
Pump Design
The centrifugal submersible grinder pump is capable of reducing all material found in normal residential and light industrial sewage containing small quantities of plastic, disposable diapers, sanitary napkins, rubber, food particles and other non-abrasive solids into a finely ground slurry. Heavy duty ASTMA48, Class 30 cast iron components.
Strong Motor
Non-overloading high torque for powerful and reliable pump operation. The rotor and stator assembly are of the standard frame design. The motor windings shall be of Class B insulation and operate in a sealed environment containing clean dielectric oil, making it capable of operating in a totally, partially or non-submerged condition for extended periods of time without damage due to the heat being generated.
2-Bearing Support
Pump shall utilize a 2-Bearing design operating in an oil bath atmosphere, consisting of an upper single row, an intermediate single row, ball bearing for thrust loads and a lower bronze sleeve bearing for radial loads to prevent shaft deflection. Long 50,000-hour B-10 bearing life.
Tandem Double Mechanical Seal Protection
Each shaft seal prevents leakage between the pump and motor. The upper seal is constructed of a carbon rotating face and ceramic stationary face, 300 series stainless steel hardware, and all elastomer parts to be Buna-N. The lower seal is silicon carbide rotating face and stationary face, 300 series stainless steel hardware, and all elastomer parts to be Viton.
Non-Overloading Hydraulic Design
The recessed centrifugal impeller allows 100% performance curve operation from shut-off to maximum flow without damage to the pump or system. The recessed vortex impeller is out of the passageway of fluid flow, eliminating concerns of blockage or wear. The impeller shall be capable of being trimmed to meet specific performance characteristics.
Proven Grinder Assembly
The shredding ring and radial cutter shall be constructed of 440C stainless steel hardened to a minimum Rockwell C55 and shall be finished with a fine cutting edge. The grinding mechanism shall be constructed to eliminate clogging and jamming under starting and all normal conditions and capable of passing stringy type solids through the pump without roping or winding the material.
Accessories Included
Stainless steel lifting handle and anti-vibration rubber mounting feet are included with the pump.