Goulds RGS2012P, RGS Series, Grinder Pump, 2 HP, 208/230 V, 1 Ph, 1-1/4" NPT

Description

Goulds RGS2012 Residential Grinder Pump
The pump is capable of grinding domestic and raw sewage containing small quanitities of plastic, rubber, cloth, paper and other non-abrasive solids. It is designed for high head sewage applications where a gravity system is not practical. Ideal for pressure sewage systems.
Features
Capable of grinding domestic sewage in individual residential applications
Anti-roping design cutter system with two blade rotary cutter threaded to shaft. Stationary cutter ring is reversible for extended service
Silicon bronze semi-open impeller with non-overloading two vane design and pump-out vanes for mechanical seal protection
Cast iron volute type casing for high efficiency
High grade turbine oil surrounds motor for more efficient heat dissipation, permanent lubrication of bearings and mechanical seal, and protection against outside environment
300 series stainless steel motor shaft, short overhang for minimum shaft deflection
Designed for continuous operation
Upper and lower ball bearings for precision positioning of parts and to carry all radial and thrust loads
Mechanical seal with hardfaced silicon carbide for longer life, stainless steel metal parts, BUNA-N elastomers
Power cable is severe duty rated, oil and water resistant
Epoxy seal on motor end provides secondary moisture barrier in case of outer jacket damage and to prevent oil wicking
O-ring assures positive sealing against contaminants and oil leakage
Electro-coat paint process protects all casting surfaces
Capacitor start with on winding thermal protector. No external capacitor kit required
Specifications:
Brand: Goulds
Mfg. Number: RGS2012P
Series: RGS
Product Type: Grinder pump
Application: Pressure sewage
Horsepower: 2 HP
Voltage: 208/230 Volts
Phase: 1
Frequency: 60 Hz
Pump Casing: Cast iron
Speed: 3450 RPM
Discharge Connection: 1-1/4" NPT
Impeller Design: Semi-open, non-clog
Impeller Material: Cast silicon bronze
Motor Design: NEMA 48 frame
Maximum Total Head: 94 ft
Motor Insulation: Class F
Maximum Flow: 42 GPM
Maximum Temperature (Intermittent): 140°F
Power Cord Length: 20 ft
Maximum Current: 15.0 Amps
Overload Protection: Yes
Maximum Submergence: 50 ft
Maximum Working Pressure: 50 PSI
Maximum Temperature (Continuous): 104°F