-40%
Jabsco 50860-0012 Stainless Steel 5/32 Hp Centrifugal Pump 12V New in Box
Jabsco 50860-0012 Stainless Steel 5/32 Hp Centrifugal Pump 12V New in Box
Jabsco 50860-0012 Stainless Steel 5/32 Hp Centrifugal Pump 12V New in Box

Jabsco 50860-0012 Stainless Steel 5/32 Hp Centrifugal Pump 12V New in Box

$ 312.04

Availability: 55 in stock
  • MPN: 18555000A
  • Discharge Port Diameter: 3/4 in
  • Recommended Fuse: 25 AMP (Not Included)
  • Modified Item: No
  • Length: 8-1/4"
  • Brand: Flojet
  • Supply Voltage: 12 V
  • Weight: 10lbs.
  • Condition: New
  • Type: Centrifugal Pumps > Straight Centrifugal High Flow Pumps
  • Country/Region of Manufacture: Mexico
  • Amp Draw: 21 AMPS Max
  • Unit Type: Unit
  • Voltage: 12V DC
  • Pump Height: 4"
  • Motor Type: 12-Volt DC Motor
  • Rated Power: 5/32 HP
  • Features: Marine Centrifugal Pump, Phase -, Pump Housing Material Stainless Steel, Horsepower 5/32 hp, Nameplate Voltage 12V DC, Maximum Feet of Head 18 ft, Compatible Intake Pipe Size 3/4 in, Intake Type NPT, Compatible Discharge Pipe Size 3/4 in, Discharge Type NPT, Motor Enclosure Totally Enclosed Fan Cooled, Maximum Flow Rate 21 gpm, Flow Rate @ 5 ft of Head (Maximum) 17 gpm, Flow Rate @ 10 ft of Head (Maximum) 10.6 gpm, Flow Rate @ 15 ft of Head (Maximum) 5.3 gpm, Suction Lift (Maximum) 6.5 ft
  • Unit Quantity: 1
  • Width: 4-1/4"
  • Motor Life: 2500 Hours
  • Waste Pump Type: Macerator Pump

    Description

    Xylem Jabsco
    Cyclone High Pressure
    General Purpose Centrifugal Pump New Box with Scratches
    m
    odel: 50860-0112
    UPC: 67188059277
    The Jabsco Cyclone 50860-0112 is a stainless steel centrifugal pump with 3/4 Inch NPT Ports, coupled to a 12-Volt DC Motor. It has an anti-clogging impeller which allows small debris to pass through the pump. The High Pressure Cyclone is a long-life pump that delivers flows of up to 21 GPM (80 LPM) & pressures up to 19 PSI (1.3 BAR), making it ideal for general transfer & circulation duties for water & mild chemicals where more restrictions are present.
    These centrifugal pumps are the correct product for closed-circuit circulation systems. Typical applications for these pumps include Hot & Cold water systems, windscreen washing, livewell & bait tank systems & liquid transfer. They can be mounted on any flat surface. The pump must be installed below the lowest fluid level to maintain flooded suction. This pump can be run dry for short periods of time, & it can be run against a closed discharge. Designed specifically for marine & industrial markets.
    Box Includes
    :
    (1) Centrifugal Pump
    (1) Technical Data Sheet
    Product Features
    :
    Handles seawater. fresh water, anti-freeze, mild chemicals, & bilge water.
    Heavy duty 316 stainless steel wet end components.
    Intermittent duty rated motor (max 30 minutes on, 30 minutes off)
    Single tool servicing (3/8" wrench-not included).
    Virtually silent running centrifugal pump.
    Long-life DC motor (2500 hours).
    Rotatable head 90° segments.
    Anti-clogging impeller design.
    Long-life mechanical seal.
    ISO 8846 MARINE (Ignition Protection).
    Specifications
    :
    Voltage: 12V DC
    Max Current Draw: 21 AMPS
    Open Flowrate: 21 GPM (80 LPM)
    Stall Pressure:19 PSI (1.3 BAR)
    Flooded Suction Required
    Fluid Temperature Range: 39°F - 203°F (4°C - 95°C)
    Fuse (Not Included): 25A Required
    Ports: 3/4" NPT