Thermionic Culture Rooster 2 2CH Tube MIC PRE + EQ - NEW - PERFECT CIRCUIT

Description

DESCRIPTION
The Thermionic Culture Rooster 2 Microphone Preamp & EQ is a 2 channel all valve preamp with EQ and distortion controls. It is designed for a wide range of applications and can produce a large range of tones, harmonic distortion and subtle dynamic control.
The pre-amp section can be used to add gain to mic, line or DI input signals. The double triode input valve (ECC81) provides a smooth sounding gain stage after the balancing input transformer. 48 volts can be applied to phantom powered mics by using the special toggle switch. The DI input bypasses the transformer to give a suitable high impedance unbalanced input.
The 'Attitude' section provides control over the amount of distortion inherently produced by the 5725 valve. This valve is also found in the Culture Vulture circuit. In this case the distortion produced can be far more subtle giving specs of 0.01% distortion when the switched 'Attitude' control is at position 1. The distortion increases drastically as the 'Attitude' control is progressively switched from position '1' to position 'Max'.
Similarly to the Culture Vulture, the unit will tend to produce predominantly more 2nd order harmonics when in 'Triode' mode and 3rd order harmonics when in 'Pentode' mode. This provides a creative means of both tone and dynamics control over the input signal as well as allowing the user to select how much and what kind of harmonics are present in the signal.
The EQ section provides a simple yet powerful musical control over frequency content. The Bass lift control gives a continuous control over the amount of bass using a unique ' varislope' curve which peaks at 60Hz. The 'mid/high' lift control gives a bell type curve with variable gain peaking at either 2.5KHz / 4KHz or a 'varislope' curve peaking at 12KHz, all selected by the frequency select switch. The 'Mid cut' control provides a bell type curve centred at 700Hz with continuous control over the amount of cut.
The 'Bass cut' switched control provides 5 positions with different cutting curves. The curves start off as high pass filters which get progressively higher in frequency and then turn into a shelving type curve that will also increase in frequency as the switch is advanced. These controls are intended to interact with the other EQ controls for a very flexible control over the entire frequency range.
The 'LPF' or low pass filter switch control will allow the high frequencies to be cut at a frequency suitable to stop harsh sounding harmonics standing out when excessive distortion is used, smoothing the resulting sound.
The output level control adjusts the signal going to the PCF 80 output valve and the final signal is balanced by a Sowter custom made transformer. The level of output signal is represented by the 3 LED display.
Features
All valve signal path
Sowter Transformer balanced ins and outs
Unique 2 channel clean mic. amps with 'Attitude' control
Option of 2 settings to select type of introduced distortion
Versatile eq. with 'varislope' control of top and bass lift
48v Phantom Power switchable to one or both
Phase invert switch on both channels
Mic./line and DI input
Low pass filter
High Pass filter
Low noise, High gain and High output level
Made in England
GUARANTEE
New Gear
We are authorized dealers for a number of great companies that back their products with standard warranties.
We extend this warranty period for 1 year beyond the manufacturer's as a token of our gratitude for shopping with us  :)
We want to make sure that you don't get stuck with a lemon and will either replace or have the unit repaired by an authorized service center on our dime.
We offer a 30 day return policy 'no questions asked'.
Unless the item is defective, you will be subject to a 15% restocking fee.
Used Gear
All gear is tested prior to listing for sale. Any known issues will be mentioned in the item description.
We work extremely hard to make sure that you have peace of mind when buying pre-owned gear.
You will have 14 days from receipt of the item to test and make sure that everything meets your expectations.
If the item is found to be defective, we will cover return shipping. You must contact us first to set up the RMA.
Any used items returned for reasons other than functionality (within this 14 days) will be subject to a 20% restocking fee.
We will bend over backwards to make sure that you are happy with your purchase.
If you have any issues or questions at all please email or call us.  We are happy to assist!
SHIPPING
Orders will be processed and handled within 1 business day in most cases.
Orders placed before 1pm PST during our business hours generally are shipped the same day.
We also offer expedited shipping. If you have any special requests please contact us first, and we will do our best to accommodate you.
Domestic Buyers
We offer
Free
shipping on every item big or small to the lower 48 US States
Hawaii, Alaska & Puerto Rico residents are subject to a handling fee, so please contact for quotes.
We ship to APO & FPO addresses, but please contact for a quote.
We insure every package for the full amount
Any purchase over 0 will require a signature.
THERE ARE NO EXCEPTIONS!
International Buyers
We ship via FedEx or USPS to most countries around the world
Buyer is 100% responsible for ALL Duties & Taxes (VAT,etc.) imposed by your local government/ customs officials.
These
are not
included in our Shipping & Handling fees so please be aware before purchasing.
International orders are usually delivered in
3-5 business days
if there are no delays caused by customs or weather conditions.
POLICIES
Return Policy
You must contact us for a RMA (Return Merchandise Authorization) within 30 days for new gear and 14 days for used gear.
Items are subject to either a 15% (new gear) or 20% (used gear) restocking fee, unless found to be defective.
Customer is required to cover shipping using a trackable service with signature confirmation.
We will cover return shipping for defective items and submit a return label via email.
All
new
items must return in 'new' condition with all original packaging, warranty cards, and cables.
All
used
items must be returned in the same condition as picture & represented online.
If
new
items arrive damaged and/or without original materials the RMA may be revoked or you may be subject to a 25% restocking fee.
If
used
items arrive damaged the RMA may be revoked or you may be subject to a 30% restocking fee.
Please allow up to 5 business days for us to process returns. Refunds, store credit or replacements will be handled within that time frame
If you experience a problem with a unit:
do not
attempt to open or repair the unit yourself.
Any attempt to do so will void any warranty or guarantee.
Please send us a detailed description of the problem you are experiencing and we will have a team member contact you as soon as possible.
International Buyers
We are not responsible for unit damaged due to use of improper voltage.
Please make sure to double check voltage compatibility and use a proper voltage converter when necessary.
CONTACT US
Our customer service hours are Monday through Friday, 10AM to 7PM Pacific Time.
Feel free to contact us
We are here to help, so if you don't get ahold of us leave a message and we'll be back with you as soon as possible.
Thanks!
© 2018 Perfect Circuit. All Rights Reserved.