VICTOR 4105C Ground Resistance Tester Large LCD Display

Description

VICTOR 4105C Ground Resistance Tester Large LCD Display
Notice:
The standard package don't include batteries.
Because,the international air shipping forbid to ship liquid,powder and batteries,
we can not put them in the package box.
Hope you can understand buy them in your local store or supermarket.
At the same time, please forgive us that we are unable to provide the English user manual.
If you need it, please contact the customer service after purchase.
Thanks for your support!
Features
VICOTR 4105C Digital ground resistance tester
VICOTR 4106C Ground resistance/soil resistivity tester
VICTOR 6415A Double Clamp Ground Resistance Tester
Features
Ground resistance measurement, ground voltage measurement, low-value resistance measurement
Two, three and four wires measure grounding resistance and soil resistivity; ground voltage and AC voltage measurement
Ground resistance, soil resistivity, DC resistance, ground voltage, AC current, leakage current measurement
power supply
DC 7.4V 2600mAh rechargeable lithium battery, the battery is full of about 8.4V
DC 7.4V 2600mAh rechargeable lithium battery, the battery is full of about 8.4V
DC 8.4V (rechargeable battery, 300 hours of continuous standby)
Range
Grounding resistance: 0.00Ω～2000Ω
Grounding resistance: 0.00Ω～30.00kΩ
Grounding resistance, DC resistance: 0.00Ω～30.00kΩ
Grounding voltage: 0V～600V
Grounding voltage: 0V～600V
Grounding voltage: AC0.0V～100.0V
/
Soil resistivity: 0.00Ωm～9000kΩm
Soil resistivity: 0.00Ωm～9000kΩm
/
/
Alternating current: AC 0.00mA～600.0A
measurement method
Precision three-wire measurement, simple two-wire measurement
Precise 4-wire, 3-wire method measurement, simple 2-wire measurement of ground resistance
Precision four-wire, three-wire method, simple two-wire, selection method, double clamp method to measure ground resistance
Measurement methods
Grounding resistance: rated current pole changing method, measuring current 20mA Max;
Grounding resistance: rated current pole changing method, measuring current 20mA Max
Soil resistivity: quadrupole method (Winner method)
Voltage to ground: average value rectification
Voltage to ground: average value rectification (between P(S)-ES interface)
DC resistance: pole changing method
Soil resistivity: quadrupole method (Winner method)
Alternating current: average value rectification (clamp-on)
Voltage to ground: average value rectification (between P(S)-ES interface)
Back light
Controllable white screen backlight, suitable for dim places
Display mode
4-digit large LCD display with backlight
Measurement instructions
LED flashing indication in the measurement, LCD reverse count display
LED flashing in measurement, LCD reverse count, progress bar diagram indication
LED flashing indication in the measurement, LCD reverse count display
LCD size
128mm×75mm; display area: 124mm×67mm
Instrument size
Height, width and thickness: 280mm×260mm×160mm
Standard test line
3 strips: red 15m, yellow 10m, green 5m each
4 strips: red 20m, black 20m, yellow 10m, green 10m each
Simple test line
2 strips: one for each of the red 1.6m and the green 1.6m
2 strips: red 1.6m, black 1.6m each
Auxiliary ground rod
2 pieces: φ10mm×150mm
4 pieces: φ10mm×150mm
measure time
Voltage to ground: about 3 times/second; ground resistance: about 15 seconds/time
Ground voltage: about 3 times/second; ground resistance, soil resistivity: about 15 seconds/time AC current: about 2 times/second;
ground voltage: about 2 times/second; ground resistance: about 7 seconds/time
Number of measurements
More than 5000 times (measure 10Ω in 20Ω mode, measure once, stop for 30 seconds and then measure)
More than 5000 (short circuit test, 1, stop 30 seconds)
Line voltage
Measurement below the AC 600V
Communication Interface
With USB interface, software monitoring, storage data can be uploaded to the computer, saved and printed
With RS232 interface, the stored data can be uploaded to the computer through software
Communication line
1 USB communication line, 1.5m long
1 RS232 communication line, 1.5m long
data storage
400groups
2000 groups
2000groups
Protection level
IP65(cover)
Overload protection
Ground resistance measurement: AC 280V/3 seconds between E-P and E-C ports
Measuring grounding resistance: AC 280V/3 seconds between C(H)-E, P(S)-ES ports
Measuring grounding resistance: AC 280V/3 seconds between C(H)-E, P(S)-ES ports
Insulation resistance
10MΩ or more (500V between circuit and case)
Above 20MΩ (500V between circuit and case)
Resistant to pressure
Between the AC 3700V/rms(circuit and the housing)
Current clamp size
/
/
Height, width and thickness: 185mm×115mm×43mm
Current clamp
/
/
2 pieces: blue and black plugs, 1 red and black plug each
Current clamp diameter
/
/
φ68mm
Current clamp lead
/
/
2m long